Constant Pressure Modulating Valve for Hygienic Processing
The FB5CPM (inlet) and FB6CPM (outlet) are air loaded sanitary constant pressure modulating valves, designed to allow the user to change set-points remotely via a cabinet or panel mounted air regulator, or through a distributed control system or PLC, using an I-P transducer.
The CPM valve is an ideal choice for automating and maintaining constant pressure set points on the inlet side of the valve for control operations, whether they are process set points or points to fully open the valve for rinse, CIP or SIP. The valve is preferred in HTST/UHT Pasteurization, after Heat Exchangers, Separator equipment, bottling lines, etc.
A wide variety of applications exist for the FBCPM in the food, beverage, health, beauty and other industries. Processes include but are not limited to:
- HTST, UHT Process control
- Pump pressure control
- Process overpressure control
- CIP system pressure control
- Pressure bypass control
- HTST/UHT process control
- 3A Approval 53-07
- Leak detection port
- Optional end connections
- Lifetime Jorlon™ diaphragm warranty
- Single diaphragm design
- Stem guiding above diaphragm
- Large diaphragm for optimal sensitivity to pressure changes
- Bolted bonnet
- Optional seat material for Class Vi shutoff
- Maximum operating pressure of 200 psi
- Maximum temperature of 300°F
- Accessory I/P or self-relieving air regulator available for automated and/or remote set point control
Sizes: 3/4″, 1″, 1-1/2″, 2″, 3″ (DN20, DN25, DN40, DN50, DN80)
Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 Gr 1.4435, AL-6XN, Hastelloy C-22 and others are optional
End Connections: ASME Tri-clamp, others consult factory
Seat material: Integral hard seat: 316L (Class IV shutoff); optional seat material: Teflon (not 3A) (Class VI shutoff)
Diaphragm material: Jordan (FDA, 3A approved)
Learn more about UHT and HTST pasteurization and how our constant pressure modulating valves can help.
Learn more about the FBCPM valve - the applications, benefits and size range. In addition to UHT and HTST applications, the CPM valve is an ideal choice for automating constant pressure set points in heat exchangers, separators, and CIP/SIP systems of filling processes.
Take a glance to see how our constant pressure modulating valve, the FBCPM, holds up against our competitor. One major difference is our one piece diaphragm compared to a fifteen piece diaphragm.
Learn more about the Constant Pressure Modulating Valve and how it can help you with your applications.
Steriflow Food & Beverage warrants the Jorlon diaphragm for use on all of our 3A Food and Beverage pressure regulators and back pressure regulators.
- 3A Certification 53-06
- EC 1025/2004
- CRN Registration Number
- PED Pressure Equipment
- SEP Declaration (Sound Engineering Practice)
- CRN Registration Number
- All products use FDA and USP Class VI approved soft goods and seals where possible
Get A Quote
Know what you need and want a quote quickly? We can help! Fill out this form and we will get back to your shortly.